|
|
Residence
Tippelt, David ; Skřek, Daniel (referee) ; Bantová, Sylva (advisor)
The subject of this bachelor's thesis is the design and elaboration of project documentation for the new construction of the Rezidence apartment building. The proposed building is located in Brno, in the Slatina district, and is located on land that is protected by an agricultural land fund, so it will be necessary to remove it from the ZPF. This plot is not located in a flooded or mined area. It is a detached building, which has four floors above ground and one underground floor. In the new building there are 12 residential units of 3 + kk and 1 + kk. In the basement there is a cellar for each apartment. In the first half there is a bike shed / carriage house, a cleaning room and a workshop with a warehouse, in the second half there are two technical rooms and a warehouse. On the first floor there is an entrance to the building, a laundry room with a drying room, a gym for the inhabitants of the house and two 1 + kk apartment units. On the second and third floor 4 units of size 1 + kk and on the top floor 2 residential units of size 3 + kk. From the second floor, each apartment has a balcony. These apartments are designed primarily for students, couples, or even a starting family. Each floor is connected by a three-armed reinforced concrete staircase, which is complemented by an elevator. The house is based on reinforced concrete foundation strips in combination with lost formwork. The vertical load-bearing structures in the basement are made up of lost formwork, the load-bearing structures above the ground are made of ceramic blocks, which are insulated with a ventilated façade and equipped with a Bond SK1 façade sandwich cassette. The horizontal load-bearing structures form a semi-assembled Porotherm system. The whole building is covered by a single-skin vegetation-retention flat roof. The new apartment building is designed to be very economical.
|
|
|
Pension for the elderly
Nykodým, Petr ; Třeštíková, Jana (referee) ; Berková, Petra (advisor)
The subject of my diploma thesis is the design documentation for the pension which is designed for the elderly and will be supplemented with a specialty from the air-conditioning branch. The building is situated in the western part of the town Bystřice nad Pernštejnem and it's located at 3058/3 about the total area of 8315,2m. The total footprint of the suggested building is 1161,2 m. The subject has got an irregularly-shaped floor plan. It is made of three subsequent triangels, it has got three above-ground floors with partial basement. The roof of the building is suggested as a warm flat roof with coating insulation. The structural system of a building is designed as longitudinal with shear walls. The exterior building masonry is suggested from sharpened clay blocks Heluz STI 40 with thickness 400 mm. The contact thermal insulation system ETICS with an insulant from EPS with thickness 100 mm is designed for all building. The building for the elderly is from its bigger part meant for citizens who are older than 65 years in the flats for one or two persons in 2FLR and 3FLR. The space for essential services to the residents is located on the 1st FLR. There are also a cafe and a surgery located in a smaller part of the 1st FLR, which are to be used both by the residents and the public.
|
|
|
Apartment building
Kaňa, Josef ; Pilík, Václav (referee) ; Kacálek, Petr (advisor)
The bachelor's thesis, entitled Apartment building, deals with project documentation at the level of documentation of construction for an apartment building. The building itself is located on the outskirts of the village Holešov in the direction of the village Přílepy. New construction sites have been created in the locality and development is planned. At the time of processing the project documentation, there are no buildings in the area and only preparatory work and installation of engineering networks are taking place there. The object is of a simple rectangular shape set in the middle of the plot. Most of the areas in the building are used for housing, the rest for technical and communication facilities. All living rooms are oriented favorably to the sides of the world. The apartment building has three floors and is partially basemented by one underground floor. Flats on the first floor of 4 + KK, flats on the second floor of 3 + KK, flats on the third floor of 2 + KK. The building is designed with a transverse wall masonry system of ceramic brick blocks, based on foundation strips. The project addresses two variants of ceiling structures, namely folded beam ceilings with superstructure and monolithic ceilings made of reinforced concrete. The building is covered with a flat roof. The building uses the ETICS contact thermal insulation system in a variant with mineral wool.
|
|
|
The New Block of Flats
Jelínek, Roman ; Hnízdilová, Aneta Aya (referee) ; Manychová, Monika (advisor)
The subject of the bachelor thesis is a new apartment building with nearly zero energy consumption and the processing of the design documentation for this building construction. The building is located in a quiet area of the village of Lužice near the town Hodonín. It is designed as a detached structure, with a partial basement and three floors, located on a slightly sloping terrain. In the basement you can find the maintenance room of the building, and the cellar cubicles for the individual apartments. On the first floor there are three apartments with their own front gardens, as well as the common areas of the bike shed, the drying room and also the fitness room. On the second floor there are four apartments with their own terraces. Now, on the third floor there are two very spacious apartments with large terraces. In front of the building there is a large parking lot, the apartment building is barrier-free by to the internal elevator. The construction system of the building is a two-way wall system. The above-ground floors are built with ceramic blocks. The perimeter masonry of the basement is consist of blocks of permanent formwork. The horizontal structures are prefamonolithic, composed of POT beams and Miako ceramic inserts. The building is based on concrete foundation strips and covered with a single-layer flat roof.
|
|
|
Multifunctional house in Jablonec nad Nisou
Klinke, Jakub ; Průša, David (referee) ; Štěpánek, Ladislav (advisor)
The subject of the bachelor thesis is the design of a multifunctional apartment building with large flats and the elaboration of construction documentation. The building is situated in a quiet location of the statutory city of Jablonec nad Nisou in a nearby distance from the dam, which is used for rest and recreation. The surrounding development consists of apartment buildings from the beginning of the last century with a height of three to four floors. The building itself is detached with four floors and one basement. On the first floor there is an establishment intended for administrative use. The first floor also contains a barrier-free apartment and a barrier-free entrance to the building. On the level of the first floor, there is also a car park with barrier-free access to the building. There are always 2 apartments on the other floors. The basement is designed as a technical floor and there are also cellars belonging to the apartments.
|
|
|
Rodinný dům
Kováčová, Nour ; Sláma, Ludvík (referee) ; Mohelníková, Jitka (advisor)
Předmětem této bakalářské práce je projektová dokumentace a návrh nového rodinného domu s téměř nulovou spotřebou energie. Dům je určen pro šest členů rodiny s překladatelskou kanceláří pro jednoho z členů rodiny. Dům se nachází v klidné části obce Jinačovice, v okrese Brno v Jihomoravském kraji České republiky. Tento objekt je samostatně stojící se dvěma patry, dvěma balkony a velkou okolní zahradou. Svislá nosná konstrukce domu je zděná z keramických tvárnic Porotherm. Vodorovná nosná konstrukce je vyrobena z předpjatých stropních panelů Spiroll. Budova je postavena na základech ze betonových pásů. Střecha je plochá se střešnímí deštovými vpustmi a izolací z minerální vlny. Budova je zateplena systémem ETICS. Projektová dokumentace obsahuje také posouzení požární bezpečnosti budovy, výpočty základů a zatížení, tepelně technické posouzení a posouzení na akustiku a denní osvětlení.
|
|
|
Apartment building in Lanškroun
Rousková, Radka ; Bečkovská, Tereza (referee) ; Brzoň, Roman (advisor)
This bachelor thesis concerns the design documentation for the construction of an apartment building in Lanškroun. The aim of the thesis is work out a layout of the building and design a suitable construction system. Design documentation complies with valid standards and regulations. The program AutoCAD was used for processing. The proposed building has three storeys and a partial basement. The apartment building has 8 flats and one of them is designed for a barrier-free. The vertical refit works above ground are designed as clay masonry, masonry consists of permanent formwork in the basement. Horizontal ceiling structures are designed as a monolithic reinforced concrete slab. The apartment building is covered warm flat roof. The building is based on foundation strips.
|
|
|
Apartment building
Barglová, Karolína ; Dohnal, Jakub (referee) ; Pěnčík, Jan (advisor)
A subject of bachelor thesis is a new apartment building and the processing of the design documentation for construction. The apartment building is located in a quiet part of a town Zubří, near the city center. The surrounding area consists mainly of apartment buildings. This object is detached with a cellar and four floors. There are spacious maisonettes in the third and fourth floor, which have terraces in the fourth floor. A car park is located close to the building. In immediate proximity there is established a wheelchair access to the object via an outdoor lift. Vertical supporting structures in the above-ground floor are made of ceramic blocks Porotherm, in basement they consist of blocks of permanent formwork. The horizontal structures are prefamonolithic, they are made of ceramic beams and ceramic inserts Miako. The building is based on concrete foundation strips and the top of the building is a warm flat roof.
|
|
|
Guest house Heller
Tesařová, Silvie ; Krupica, Roman (referee) ; Bantová, Sylva (advisor)
The diploma thesis entitled "Guest house Heller" processes project documentation at level for building construction, which is located on the outskirts of the city of Jihlava. The building has 23 accommodation units and a restaurant, with a dedicated barrier-free accommodation unit on the ground floor. It has gained its location on a flat plot of land near a natural park with a pond and public sports fields. The guesthouse is T-shaped, with set-back floors, and is based on reinforced concrete foundations. The vertical load-bearing structures of the upper floors are made of cavity bricks, while the underground floor uses lost formwork. The load-bearing partitions are mainly made of plasterboard. Precast prestressed panels were used for the horizontal structures. The entire building is fitted with external thermal insulation composite system and the roof is designed as a flat vegetated roof with an attic. Aesthetically, Guest house Heller is designed in a combination of white and grey colours, enlivened by beech wood panelling. This thesis provides a comprehensive view of the architectural and structural aspects of the guesthouse, including technical details and material specifications. The building is designed as a nearly-zero energy building.
|
|
|
Wine bar with accommodation
Ryšavý, Miloš ; Machát, Jan (referee) ; Petříček, Tomáš (advisor)
This bachelor thesis solves design documentation for the execution of the project. It is a new building of wine bar with accommodation. The thesis is divided into a drawing part, a text part and the supplements. The text part contains an accompanying and total engineering report and an engineering report for the execution of the project. The supplement´s part includes drawings and other specialized parts. All parts are processed by using a PC in a text and graphical CAD editor.
|
guest ::
